Main page

This Onlineshop was created with Gambio Shopsoftware.

This text can be edited at Content Manager -> Index in the backend.

Our advice

INFINITY IF18-3 1/8 GP RACING CHASSIS KIT...

CM00013

RRP 1.029,00 EUR
Only 999,00 EUR

LENS BODIES 1/8 On Road BORA Light Pre Cutted...

Lens Bodies is happy to present the new BORA bodyshell for Onroad 1/8 class.

FRONT END
The front end has a very aggressive line with a greater protrusion than the bodies on the market in the central part which increases grip, steering and cornering speed.
The nose is not straight but is rounded thus providing more downforce in fast cornering.

REAR END
The two fins with the 6 rear micro fins and the cockpit that closes the engine and filter are specially designed to avoid turbulence as much as possible and increase aerodynamic grip.
The two higher-than-normal side wings increase the smoothness and top speed of the car.

SIDES
The entire side of the bodyshell has been designed for a better air flow and to avoid turbulence, furthermore this design also acts as a stiffener for the side bulkheads and to avoid deformation at high speeds.

The project was developed in the wind tunnel with the help of the fluid dynamics/aerodynamics department of the SUN University of Aversa.
We have thus managed to achieve a balance between downforce and smoothness of the model when cornering to achieve faster lap times.
This body has also been developed and approved along with our Factory drivers.

Our standard price 33,90 EUR
Your price 33,22 EUR
You save 2%

ANTI TOURING CAR BODY 190mm #ZR-0014-05

Our standard price 30,00 EUR
Your price 29,40 EUR
You save 2%

RUDDOG Racing 6200mAh 150C/75C 7.6V Ultra-LCG...

RP-0680

Our standard price 65,99 EUR
Your price 64,67 EUR
You save 2%

Xtreme Karosserieversteifung S3 Evo (#MX-MTR003)...

Xtreme Karosserieversteifung S3 Evo (#MX-MTR003)

Our standard price 19,90 EUR
Your price 19,50 EUR
You save 2%

Xtreme Karosserieversteifung S3 Carbon...

Xtreme Karosserieversteifung S3 Carbon (#MX-MTR003C)

Our standard price 44,10 EUR
Your price 43,22 EUR
You save 2%

Xtreme 1/8 Super Diablo Karosserie 0.75mm...

Xtreme 1/8 Super Diablo Karosserie 0.75mm - cut-out Infinity (#MX-MTB0414-07CI)

Our standard price 33,30 EUR
Your price 32,63 EUR
You save 2%

PEPE Silikon Stick (#PG16300)

Our standard price 12,00 EUR
Your price 11,76 EUR
You save 2%

RUDDOG RP6 Turbo Glow Plug (Medium | Onroad)...

RUDDOG RP6 Turbo Glow Plug (Medium | Onroad) 1pc

10,99 EUR

1/8 Enneti Front LIGHT competition Shore...

1/8 Enneti Front LIGHT competition Shore BI 40/32 (#8ETLNBI-40-32)

Our standard price 13,40 EUR
Your price 13,13 EUR
You save 2%

1/8 Enneti On-Road White Set 32/35 Shore...

1/8 Enneti On-Road White Set 32/35 Shore (#Enneti-white Set 32/35)

Our standard price 26,00 EUR
Your price 25,48 EUR
You save 2%

INFINITY IFB8 1/8 SCALE GP BUGGY CAR CHASSIS...

CM00015

Our standard price 839,00 EUR
Your price 822,22 EUR
You save 2%

Hobbywing Xerun V10 Brushless Motor G4R...

Hobbywing Xerun V10 Brushless Motor G4R (2-3s) 13.5T Sensored für 1:10 (#HW30401140)

Our standard price 95,90 EUR
Your price 93,98 EUR
You save 2%

Xtreme 1/10 CZ1 Karosserie 0.75mm (#MTB0416-07)...

Xtreme Aerodynamics 1/10 CZ1 Karosserie 0,75mm unausgeschnitten
Verpackungsinhalt: 1 Stück
Die Karosserie wird nicht lackiert geliefert!

Our standard price 26,90 EUR
Your price 26,36 EUR
You save 2%

Tuning Velox Competion Clutch V10 (#510420)...

Tuning Velox Competion Clutch V10 (#510420)

Our standard price 73,76 EUR
Your price 72,28 EUR
You save 2%

PG "Pcheck" Engine Temperature control Set...

Produktinformationen "PG "Pcheck" Engine Temperature control Set"
Set bestehend aus:
-PG23004
-PG23005

Months and months of testing but we are finally there: P-Check!
A high-precision temperature detector, compatible with all models with both electric and nitro engines, it guarantees a real and immediate temperature reading thanks to a thermocouple that will easily install in your engine, of course for more convenient use thermocouples will also be available as spares so you can put one per engine.
"PG "Pcheck" Engine Temperature control Set"

Our standard price 100,00 EUR
Your price 98,00 EUR
You save 2%

P-Grip 3.0 TYRE ADDITIVE FOAM SPEC (#PG19100-3)...

Nach vielen Tests sind wir bereit mit all dem neuen P-Grip, dem 3.0!

Dieser neue Zusatzstoff wurde speziell für Schaumstoff und Tarmac-Suraface entwickelt und garantiert eine längere Wirkung und eine bessere Leistung als der alte 2.0.

Einfach zu finden, ist die 3.0-Version in fluo pink Farbe mit blauem Glitzer im Inneren!

P-Grip 3.0 gibt Ihnen eine einfache Verbesserung Ihrer Leistung!